Previous: Excavation          Next: Foundation Walls

Footings

In many cases, we’re trying to use fairly conventional construction techniques. However, the house foundation requires special treatment, as most houses lose significant amounts of heat to the ground. To achieve Passive House, insulation around and below the entire foundation is essentially required. Our details call for a 12″ thick strip of geotechnical-grade EPS insulation beneath the footings (min. 100kPa bearing capacity).

 

8885070235_1dd1719e35_o

Rebar and wood package, ready to go. Big, beautiful, ominous Alberta summer sky in the distance!

 

8885087689_3b4b9ffa23_o

Setting up the forms…

 

8885698068_069f243efc_o

This is another view of the EPS package, and the tool shed that we used to do a test of the house’s exterior colour scheme.

 

8885705374_40aa505865_o

More forms…

 

OLYMPUS DIGITAL CAMERA

With the EPS placed, the footings are poured up to the required level datums.

 

 

OLYMPUS DIGITAL CAMERA

Close-up of the stepped footings.

 

 

OLYMPUS DIGITAL CAMERA

This is the angled corner at the south corner of the house. Both floors will feature large 10’x6′ window openings to capture as much southern solar radiation in the winter months, with relatively deep overhangs to prevent overheating in the summer.

 

OLYMPUS DIGITAL CAMERA

Footings complete! The pad footing at the center is the only other structural support for the house, minimizing any chance for unfortunate thermal bridges into the ground…

 



Previous: Excavation          Next: Foundation Walls

2 responses to “Footings”

  1. Bruce says:

    How thick is the vertical foam on the footings?
    Do you have a photo of the footing form work with foam in place before concrete placement?
    Standard 10″ concrete walls?
    Very interesting website.

Leave a Reply to Bruce Cancel reply

Your email address will not be published. Required fields are marked *